Honeywell’s 5808W3 is a 3V lithium powered, photoelectronic smoke/heat detector with a built-in wireless transmitter. It is intended for use with any 5800 Series Wireless Receiver/Transceiver for residential installations (for commercial installations, the 5881ENHC or the 5883H receiver is required). The transmitter can send alarm, tamper, maintenance (when control panels are equipped to process maintenance signals), and battery condition messages to the system’s receiver. Smoothing algorithms minimize nuisance alarms by smoothing out short term spikes from dust and smoke – virtually eliminating nuisance alarms. Since there are no holes to drill or wires to run, you can preserve the beauty of the building while protecting it. The 5808W3 is an ideal smoke detector for those difficult to wire locations, applications where room aesthetics are critical, or where hazardous materials exist. All models also feature a restorable, built-in, fixed temperature (135°F) thermal detector that is also capable of sensing a pre-freeze condition if the temperature is below 41°F. Improved Robust RF Field Strength The distance between the detector and receiver has been significantly increased without the need for a repeater. Smoothing Algorithms Mathematical calculations in the detector’s software that minimize nuisance alarms by smoothing out short term spikes from dust and smoke. Smart Check A signal is sent to the control panel when the detector requires cleaning. This allows a regular, non-emergency service call to clean the detector before it goes into alarm. Drift Compensation Virtually eliminates nuisance alarms from long-term dust build-up by automatically adjusting the detector’s sensitivity. Removable Detector Cover and Chamber Top The technician is able to quickly and easily clean the detector chamber without disassembling the detector head. Approved UL Listings for Residential and Commercial Applications Both residential and commercial installation requirements are met. Additional LED Status Indicators Identifying between alarm or trouble conditions is a snap with green and red LED status indicators. A green LED denotes a normal condition while the red LED indicates abnormal conditions. Easy-to-install Mounting Base The sturdy mounting base allows the detector to be more easily installed on uneven surfaces i. The mounting base has larger mounting ports, which accommodate drywall anchors for easy surface mounting. Utilizes one long-life 3V lithium battery. Microcontroller runs on a 4.0 MHz clock. Horn operates at 3.3 KHz with sound pressure level of 85 dBA at 10 feet. Built-in wireless transmitter, temporal code 3 sounder. Maintenance signal fully complies with the sensitivity test requirement specified in NFPA 72, 7-2.2 and is approved by UL. Thank you for looking at our items and we hope to be your preferred alarm equipment supplier. The item “Ademco ADT Honeywell 5808W3 Wireless RF Fire Heat Smoke Detector Alarm Sensor” is in sale since Tuesday, December 03, 2013. This item is in the category “Home & Garden\Home Improvement\Home Security\Smoke & Gas Detectors\Smoke Detectors”. The seller is “alarmsupplies1″ and is located in Willow Springs, Illinois. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, TR, CL, CO, CR, DO, PA, TT, GT, SV, HN, JM.

• Brand: Honeywell
• Model: Photoelectric Wireless Smoke / Heat Detector
• MPN: 5808W3
• Country/Region of Manufacture: Mexico
• Type: Wireless
• UPC: 781410807174

Honeywell’s 5806W3 is a 3V battery operated, photoelectronic smoke detector with a built-in wireless transmitter. It facilitates fire verification for false alarm reduction requirements by ANSI/SIA CP-01standards and is intended for use with any of Honeywell’s 5800 Series wireless receiver/transceivers for residential installations. The 5881ENHC or 5883H receivers are required for commercial installations. The transmitter can send alarm, tamper, maintenance (when control panels are equipped to process maintenance signals) and battery condition messages to the system’s receiver. The maintenance signal fully complies with the sensitivity test requirement specified in NFPA 72, 7-2.2 and is UL approved. The 5806W3 incorporates a state-of-the-art optical sensing chamber and advanced microprocessor. It also helps eliminate nuisance alarms and virtually eliminates non-billable service calls and fines resulting from false alarms. The microprocessor allows the detector to automatically maintain proper operation at factory calibrated detection levels, even when sensitivity is altered due to the presence of contaminants settling into the unit’s smoke chamber. A removable detector cover and chamber top allows the technician to quickly and easily clean the detector chamber without disassembling the detector head. Since there are no holes to drill or wires to run, installers can preserve the beauty of the protected premise while protecting it. The 5806W3 is an ideal smoke detector for difficult to wire locations, applications where room aesthetics are critical or where hazardous materials exist. Smoothing Algorithms Mathematical calculations in the detector’s software that minimize nuisance alarms by smoothing out short term spikes from dust and smoke. Smart Check A signal is sent to the control panel when the detector requires cleaning. This allows a regular, non-emergency service call to clean the detector before it goes into alarm. Drift Compensation Virtually eliminates nuisance alarms from long-term dust build-up by automatically adjusting the detector’s sensitivity. Removable Detector Cover and Chamber Top Provides the technician the ability to quickly and easily clean the detector chamber without disassembling the detector head. Approved UL Listings for Residential and Commercial Applications Both residential and commercial installation requirements are met. Additional LED Status Indicators Identifying between alarm or trouble conditions is easier with green and red LED status indicators. The green LED denotes a normal condition while the red LED indicates an abnormal condition. Easy-to-install Mounting Base The sturdy mounting base allows the detector to be more easily installed on uneven surfaces i. The mounting base has larger mounting ports to accommodate drywall anchors for easy surface mounting. Improved Robust RF Field Strength The distance between the detector and receiver has been significantly increased. Utilizes one long-life 3V lithium battery. Microcontroller runs on an 4.0 MHz clock. Horn operates at 3.3 KHz with sound pressure level of 85dBA at 10 feet. Built-in wireless transmitter, temporal code 3 sounder. Thank you for looking at our items and we hope to be your preferred alarm equipment supplier. The item “Ademco ADT Honeywell 5806W3 Wireless RF Fire Smoke Detector Alarm Sensor No Heat” is in sale since Sunday, August 31, 2014. This item is in the category “Home & Garden\Home Improvement\Home Security\Smoke & Gas Detectors\Smoke Detectors”. The seller is “alarmsupplies1″ and is located in Willow Springs, Illinois. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, TR, CL, CO, CR, DO, PA, TT, GT, SV, HN, JM.

• Brand: Honeywell
• Model: Photoelectric Wireless Smoke Detector
• MPN: 5806W3
• Country/Region of Manufacture: Mexico
• Type: Wireless
• UPC: 781410837546